← Back to Red Light Therapy Device Mito Red Light

Mito Red Light MitoPRO 300+

Face and neck sessions, Targeted joint areas, Desk side use, Travel with a stand, Entry level panel setup

Overview

The MitoPRO 300+ is the smallest panel in Mito Red Light's MitoPRO+ series, sized for face, neck and other targeted areas rather than full body work. Four wavelengths, 630 nm and 660 nm red plus 830 nm and 850 nm near-infrared, come from 60 quad-chip LEDs in an even 50/50 red to NIR split. Mito publishes laboratory spectroradiometer readings above 130 mW/cm² for red and above 60 mW/cm² for NIR at 6 inches, alongside lower consumer meter figures. The 10 by 12 inch panel draws 90 W, weighs 10 lb, includes a remote control and carries a 3 year warranty with FDA Class II registration and ETL certification.

Key Highlights

  • Four wavelengths from 60 quad-chip LEDs: 630 nm, 660 nm, 830 nm and 850 nm at 25 percent each
  • Mito publishes lab readings above 130 mW/cm² red and above 60 mW/cm² NIR at 6 inches
  • 10 x 12 in panel draws 90 W and weighs 10 lb
  • Fixed 50/50 red to near-infrared split, with a built-in timer and a remote control in the box
  • FDA Class II registered, ETL certified and backed by a 3 year warranty

Technical Specifications

Brand Mito Red Light
Model Mito Red Light MitoPRO 300+
Wavelengths 630 nm, 660 nm, 830 nm and 850 nm, 25 percent of the LEDs at each wavelength
Irradiance >130 mW/cm² red and >60 mW/cm² near-infrared at 6 in (laboratory spectroradiometer readings)
LED Count 60 quad-chip LEDs
Treatment Area Face and neck, targeted areas; 10 x 12 in panel
Modes Red and near-infrared emitted together in a fixed 50/50 split; no separate wavelength modes
Timer Built-in timer plus included remote control; vendor suggests 10 minute sessions at 6 to 18 inches
Certification FDA Class II registered medical device, ETL certified, ISO 9001/14001/45001
Power 90 W
Weight 10 lb
Dimensions 10 x 12 in panel face (depth not published)