RC Drift Car
4 products in this category · newest first. Full spec sheets, side by side.
RC Drift Car
4 products in this category · newest first
| Model | Scale | Drive | Motor | ESC | Battery | Runtime | Top Speed | Radio | Chassis | Dimensions | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HPI Stage-D10 Ford Mustang RTR Spec 5-FD (Vaughn Gittin Jr.) HPI Racing | 1/10 | 2WD, rear-wheel drive | Firebolt 20T 540 brushed motor | SC-3SWP2 60A waterproof ESC with XT60 connector | Not included (requires 2S LiPo with XT60 plug) | Not published | Not published | HPI TF-51 4-channel 2.4GHz transmitter with RF-51 receiver | Stage-D10 purpose-built RWD drift chassis, 100+ motor positions, 246 to 264 mm adjustable wheelbase, D-Box3 Lite gyro | 460 x 200 x 120 mm, 255 mm wheelbase | Not published |
| Kyosho FAZER D2 FZD2 Nissan Silvia S13 Tuned Ver. Purple Kyosho | 1/10 | 2WD, rear-wheel drive | Kyosho G22 brushed motor | Brushed ESC included, model not published | Not included (7.2V NiMH pack recommended) | Not published | Not published | Kyosho Syncro KT-231P+ 2.4GHz, KRG-331D receiver with built-in gyro | FZD2 drift chassis, high-mounted motor, long-span suspension arms, 240 to 273 mm adjustable wheelbase | 484 x 204 x 136 mm, 260 mm wheelbase | Approx. 1,450 g |
| Redcat Lightning EPX Drift Redcat Racing | 1/10 | 4WD, shaft driven | 19T RC550 brushed motor | 40A brushed waterproof ESC with forward and reverse | 7.2V 2000mAh NiMH pack and charger included | Not published | Not published | 2.4GHz AFHDS radio system | Plastic drift chassis with aluminum top plate, independent suspension, oil-filled shocks | 360 x 200 x 112 mm, 260 mm wheelbase, 4.5 mm ground clearance | Not published |
| Tamiya TT-02D Drift Spec Chassis Kit (58584) Tamiya | 1/10 | 4WD, shaft driven | Type 540 Sport-Tuned brushed motor | Not included (requires a 2-channel R/C unit with ESC) | Not included | Not published | Not published | Not included | TT-02 bathtub frame, 4-wheel double wishbone suspension, CVA oil shocks, full ball bearings | 376 x 182/190 mm, 251/257 mm wheelbase | Not published |
A drift RC car is not a touring car with hard tires. It needs steering lock to point the front wheels into a slide, a rear end that breaks away predictably, and throttle you can modulate at low speed. These four cars behave very differently on carpet.
Prices run from $158.90 for a Tamiya TT-02D kit with no electronics to $324.99 for the HPI Stage-D10 with a licensed body and gyro. The gap is not quality but whether the box holds a radio, ESC, battery and charger.
What to Know When Buying an RC Drift Car
Scale
1/10 is the hobby standard and every car here uses it. Bodies, wheels, tires and spares are widely available, and most indoor tracks are built around the class. 1/16 and 1/18 cars cost less but use proprietary parts, have limited steering lock and cannot take standard electronics.
Rear-wheel drive versus four-wheel drive
RWD is the realistic layout. The Kyosho FAZER D2 and HPI Stage-D10 are purpose-built RWD drift chassis, not converted touring cars. RWD demands countersteer: as the rear steps out, you steer into the slide to hold the angle. It is harder to learn and more rewarding.
4WD cars such as the Redcat Lightning EPX Drift and Tamiya TT-02D slide on all four tires. That is more forgiving indoors, but it feels less like a real drift car and scrubs speed through a corner.
Countersteer and gyros
A gyro makes RWD usable. The Kyosho KRG-331D receiver has one built in and corrects steering and throttle, while the HPI D-Box3 Lite allows gain adjustment from the TF-51 transmitter. It does not drive for you. It removes the small corrections that would spin the car, letting a beginner work on line and angle.
Motor and ESC
All four cars ship brushed, from the 19T RC550 in the Redcat to the 20T Firebolt 540 in the HPI and the G22 in the Kyosho. Brushed power is smooth at low rpm and cheap to replace, which suits carpet. Brushless adds top end, but indoors the extra speed shortens the time between corrections.
Reverse matters more than peak current. A drift car ends up facing the wrong way regularly, and backing out under power saves a walk. The Redcat includes a 40A waterproof unit with forward and reverse, and the HPI uses a 60A waterproof SC-3SWP2 on XT60. The Tamiya includes no ESC.
Battery and radio
Only the Redcat is complete, with a 7.2V 2000mAh NiMH pack and charger. The Kyosho needs a 7.2V NiMH pack, the HPI a 2S LiPo on XT60, and the Tamiya both a battery and a radio with ESC. Budget $60 to $150 for those, plus a LiPo-safe charger.
Chassis and surface
Look for adjustable wheelbase and wide steering throw. The FZD2 adjusts from 240 to 273mm, the Stage-D10 from 246 to 264mm, and the TT-02 at 251 or 257mm. Carpet gives the most grip and consistent slides, while smooth concrete is faster and harder on tires. Prepared tracks use a marked carpet line, where setup changes show.
Key Technical Specifications
| Specification | What It Means | Recommendation |
|---|---|---|
| Scale | Body size relative to a full car | 1/10 for parts and track rules |
| Drivetrain | RWD or 4WD, shaft or belt | RWD for realism, 4WD to learn |
| Motor | Brushed turns or brushless rating | Brushed 19T to 20T indoors |
| ESC | Current rating, waterproofing, reverse | 40A or more, with reverse |
| Battery | NiMH 7.2V or 2S LiPo, plus plug type | Match the ESC, XT60 on the HPI |
| Radio | 2.4GHz transmitter and receiver | Included on RTR, extra on kits |
| Wheelbase | Distance between axles | Adjustable for body choices |
| Steering lock | Maximum front wheel angle | More lock holds a deeper angle |
| Tires | Drift compound and wheel width | 24mm drift tires on carpet |
Types of RC Drift Cars
Ready-to-run 4WD drift cars
The Redcat Lightning EPX Drift at $199.95 is the clearest example. A 19T RC550 motor and drift tires break the rear loose, while shaft-driven 4WD keeps the car pointing where you aim it. It arrives with a 2.4GHz radio, 7.2V 2000mAh NiMH pack and charger, so only AA cells are missing.
Ready-to-run RWD drift cars
The Kyosho FAZER D2 at $245.99 uses the drift-specific FZD2 chassis with a high-mounted G22 motor and long-span suspension arms. The tuned Nissan Silvia S13 body in purple is factory finished, and the Syncro KT-231P+ radio pairs with a gyro receiver. It weighs about 1,450g and needs a battery and charger.
The HPI Stage-D10 at $324.99 is the competition-leaning option. The chassis was developed over three years as a dedicated RWD platform, and the box includes a licensed 2024 Ford Mustang RTR Spec 5-FD body in Vaughn Gittin Jr. livery, an LED light kit, HDPE T-Drift tires and the four-channel TF-51 radio. It needs a 2S LiPo and charger.
Unassembled kits
The Tamiya TT-02D at $158.90 is the cheapest way in and the most work. You get the drift-spec TT-02 bathtub chassis, 24mm Super Driftech tires on plated wheels, CVA oil shocks, full ball bearings and a 540 Sport-Tuned motor. You do not get a body, radio, ESC, battery or charger, and assembly takes an evening.
Price Ranges
| Segment | Price | What You Get | Examples |
|---|---|---|---|
| Entry kit | Under $200 | Unassembled chassis, motor, tires, no electronics | Tamiya TT-02D at $158.90 |
| Entry RTR | $200 to $260 | Assembled 4WD car, radio, NiMH pack, charger | Redcat Lightning EPX Drift at $199.95, Kyosho FAZER D2 at $245.99 |
| Club RTR | $260 to $400 | Purpose-built RWD chassis, gyro, licensed body, no battery | HPI Stage-D10 at $324.99 |
| Competition | Above $400 | Brushless power, adjustable suspension, spares | Built-up drift chassis and brushless conversions |
The Tamiya kit looks like the bargain until you add a radio with ESC, a battery, a charger and a body, which brings the total to $300 or more. The Redcat at $199.95 is the only car here that runs from the box with nothing else purchased except AA cells.
Top Brands
| Brand | Known For | Segment |
|---|---|---|
| Redcat Racing | Complete RTR packages, waterproof electronics, low entry price | Entry to mid-range |
| Kyosho | Purpose-built FZD2 chassis, gyro receivers, finished bodies | Mid-range |
| HPI Racing | Dedicated RWD platform, licensed liveries, D-Box gyros | Club to competition |
| Tamiya | Buildable kits, huge body and parts range, TT-02 support | Entry kits to club |
Comparison with Other Options
Drift car versus touring car
A touring car can be fitted with drift tires, but it usually lacks steering lock and has a weight balance that resists rotation. The TT-02D shows what the conversion needs: drift tires, reinforced uprights and damper stays, plus bearings throughout. A purpose-built chassis such as the Stage-D10 adds rear-biased motor positions and a gyro.
1/10 versus 1/16
A 1/16 car fits a hallway and costs less, but it runs proprietary batteries, has little steering lock and cannot use standard wheels or bodies. Buy 1/16 for a child, and 1/10 for anything resembling the hobby.
Brushed versus brushless
Brushed motors are smoother off the line, which suits drift. Brushless adds efficiency, runtime and top end, but on a tight carpet line the extra speed shortens the time between corrections. Convert after you can hold a consistent angle.
Common Mistakes When Buying
- Forgetting the electronics budget on a kit. The TT-02D at $158.90 needs a radio, ESC, battery, charger and body, which is another $140 to $200 before it moves.
- Buying RWD without a gyro. A rear-drive car with no gyro and no experience spins on the first throttle input. Start on 4WD or buy a gyro-equipped car.
- Assuming a battery is included. Only the Redcat ships with a pack and charger. The Kyosho needs NiMH, the HPI a 2S LiPo on XT60, and the Tamiya both.
- Mixing connector types. The HPI ESC uses XT60. A battery with a different plug means soldering before the first run.
- Upgrading before driving. Aluminum arms add weight and reduce crash tolerance. Spend on tires and practice first.
- Ignoring the surface. Carpet, concrete and prepared track each want a different tire. A carpet setup feels nervous on asphalt.
Conclusion
For a first drift car with no further shopping, the Redcat Lightning EPX Drift at $199.95 is the simplest answer: 4WD stability, a complete radio and battery package, and enough adjustment to learn on carpet or concrete. If you want the realistic rear-drive experience and will pay for a battery, the Kyosho FAZER D2 at $245.99 adds a purpose-built chassis and gyro receiver for about $46 more.
The HPI Stage-D10 at $324.99 suits anyone heading to a club or prepared track, with the widest setup range and a body worth keeping. The Tamiya TT-02D at $158.90 rewards builders who want to choose their own electronics, provided they budget the full $300. Whichever you choose, buy tires for your surface, set gyro gain low at first, and spend the first sessions on throttle control rather than more power.