← Back to Portable Tire Inflator
RYOBI
RYOBI 18V ONE+ High Pressure Digital Inflator (PCL001B)
Cordless tyre inflation for ONE+ owners, trailer and light truck top ups, garage and driveway use
Overview
The RYOBI 18V ONE+ High Pressure Digital Inflator (PCL001B) is a cordless pump that runs on the same 18V battery as the rest of the ONE+ range. It reaches 160 PSI and uses a backlit digital gauge with auto shutoff, so it stops when the tyre reaches the pressure you set. A 24 inch hose and adapters for balls, Presta valves and pinch valves store on the body. The tool only version ships without a battery, while the PCL001K1 kit adds a 2Ah pack and a charger.
Key Highlights
- The 160 PSI ceiling is the highest in this group, enough for light truck tyres, trailer tyres and high pressure spares
- Set the target on the digital LCD and the auto shutoff stops the pump at that pressure, so you can leave it running while you check the other wheels
- Runs on any RYOBI 18V ONE+ battery, so it shares packs and chargers with the rest of a ONE+ tool collection
- The 24 in high pressure hose and three adapters for balls, Presta valves and pinch valves store on the body
- The tool only version keeps the entry cost low if you already own 18V ONE+ batteries, and the kit version adds a 2Ah pack and charger
Technical Specifications
| Brand | RYOBI |
|---|---|
| Model | RYOBI 18V ONE+ High Pressure Digital Inflator (PCL001B) |
| Max Pressure | 160 PSI (0 to 160 PSI operating range) |
| Flow Rate | Not published (RYOBI lists pressure and hose size but no airflow figure) |
| Power Source | RYOBI 18V ONE+ battery, sold separately with the tool only version. No 12V car socket option. |
| Battery Capacity | No battery in the box with PCL001B; the PCL001K1 kit adds a 2.0Ah 18V ONE+ pack and charger. Any 18V ONE+ battery fits. |
| Auto Shutoff | Yes. Cuts off automatically when the target pressure set on the digital gauge is reached. |
| Hose Length | 24 in (610 mm) high pressure air hose |
| Gauge Accuracy | Digital LCD shows target and current pressure; RYOBI does not publish a tolerance figure |
| Inflation Time | Not published (RYOBI quotes no fill time for this model) |
| Presets | No preset modes. Set a target pressure on the digital gauge and the pump stops there. |
| Dimensions | Not published (RYOBI does not list overall dimensions on the product page) |
| Weight | Not published (RYOBI does not list weight on the product page) |
| Warranty | 3 year limited warranty |
