Infrared Thermometer
9 products in this category · newest first. Full spec sheets, side by side.
Infrared Thermometer
9 products in this category · newest first
| Model | Measurement Range | Accuracy | Response Time | Emissivity | Distance Ratio | Display | Modes | Connectivity | Battery | Weight | Dimensions |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Blackstone Infrared Thermometer with Probe Blackstone | 0°C to 500°C (32°F to 932°F) infrared; probe 50°C to 300°C (122°F to 572°F) | Not published | Not published | Not published | Not published | LCD, Celsius and Fahrenheit | Infrared surface temperature; folding probe for internal food temperature; Celsius and Fahrenheit | None | 2 x AAA (not included) | Not published | Not published |
| Ooni Digital Infrared Thermometer Ooni | -30°C to 550°C (-22°F to 999°F) | ±2% of reading or ±4°F, whichever is greater | Under 300 ms | Adjustable, factory calibrated for cordierite pizza stones | 10:1 | Backlit color LCD with numeric and color-coded temperature display | Surface temperature; laser-guided spot and scan modes; scan records minimum, maximum and average; Celsius and Fahrenheit | None | 2 x AAA Duracell, about 5 hours continuous | Not published | Not published |
| ThermoWorks Industrial IR with Circle Laser (IRK-2) ThermoWorks | -50°C to 550°C (-58°F to 1022°F) | ±1°C from 15°C to 35°C; ±2°C or ±2% of reading from 0°C to 550°C; ±2°C plus 0.05°C per degree below 0°C from -60°C to 0°C | 1 second (infrared) | Adjustable 0.1 to 1.0 in 0.01 increments | 12:1 | Backlit digital LCD, 0.1 degree resolution to 999.9 and 1.0 degree above | Surface temperature; circle laser targeting; high and low alarms; Type K thermocouple probe input; Celsius and Fahrenheit | None | 2 x AAA, about 140 hours | 256 g (9 oz) | 119.2 x 47.5 x 171.8 mm (4.7 x 1.87 x 6.76 in, H x W x D) |
| ThermoWorks Thermapen IR ThermoWorks | -49.9°C to 349.9°C (-58°F to 661.8°F) infrared | ±1.0°C from 0°C to 100°C; ±2.0°C or 2% of reading from -49.9°C to 0°C and 100°C to 349.9°C | 1 second (infrared); 2 to 3 seconds (probe) | 0.95 default, adjustable 0.1 to 1.0 | 5:1 | Backlit LCD, 1.0 x 1.54 in, rotates 360 degrees, 0.1 or 1.0 degree resolution | Infrared surface scan with minimum and maximum capture; folding Type K probe for internal temperature; Celsius and Fahrenheit; motion-sensing sleep and wake | None | 2 x CR2032, about 1,000 hours | 120 g (0.26 lb) | 157 x 50 x 19 mm (6.18 x 1.97 x 0.75 in) |
| Etekcity Lasergrip 1080 Infrared Thermometer Etekcity | -50°C to 610°C (-58°F to 1130°F) | ±2°C or ±2% of reading | ≤ 500 ms | Adjustable 0.1 to 1.0 | 12:1 | LCD, 0.1°C (0.1°F) resolution | Surface temperature; single-spot measurement with laser targeting; Celsius and Fahrenheit | None | 2 x AAA 1.5V; auto-off after 15 seconds | Not published | Not published |
| FLIR TG165-X MSX Thermal Camera Teledyne FLIR | -25°C to 300°C (-13°F to 572°F) | ±1.5°C (±3°F) from 50°C to 100°C, ±2.5°C (±5°F) from 0°C to 50°C and 100°C to 300°C, ±3°C (±7°F) from -25°C to 0°C | Not published (8.7 Hz image frame rate) | Adjustable 0.1 to 0.99, with 4 preset levels plus custom adjustment | 24:1 | 320 x 240 pixel TFT color display | Surface temperature inspection; MSX thermal and visual imaging; center spot meter; 6 color palettes (Iron, Rainbow, Whitehot, Blackhot, Arctic, Lava) | USB Type-C for data transfer and charging; no Wi-Fi or Bluetooth | Rechargeable 3.7 V lithium-ion, about 5 hours scanning (4.5 hours with laser on), 4 hours to 90 percent charge | 394 g (13.9 oz), battery included | 210 x 64 x 81 mm (8.3 x 2.5 x 3.2 in) |
| Fluke 62 MAX+ Infrared Laser Thermometer Fluke | -30°C to 650°C (-22°F to 1202°F) | ±1.0°C or ±1.0% of reading, whichever is greater; ±2.0°C from -10°C to 0°C; ±3.0°C from -30°C to -10°C | < 500 ms (95% of reading) | Adjustable 0.10 to 1.00 | 12:1 (calculated at 90% energy) | Digital backlit LCD, 0.1°C (0.2°F) resolution | Surface temperature; dual rotating lasers; MIN, MAX, AVG and DIF; high and low alarms | None | 1 x AA, about 8 hours with laser and backlight on | 255 g (8.99 oz) | 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in) |
| iHealth PT3 No-Touch Forehead Thermometer iHealth | 32°C to 42.9°C (89.6°F to 109.2°F) | ±0.2°C from 35°C to 42°C; ±0.3°C outside that range | About 1 second | Not published (sealed, factory-calibrated body thermometer) | Not applicable; fixed 3 cm (1.18 in) measurement distance | Backlit LED | Body temperature, no-touch forehead; Celsius and Fahrenheit; single-button operation | None (standalone, no app) | 2 x AAA 1.5V (DC 3V); auto-off after 8 seconds | Not published | Not published |
| Klein Tools IR5 Dual Laser Infrared Thermometer Klein Tools | -30°C to 400°C (-22°F to 752°F) | ±2°C or ±2% of reading; below freezing ±4°F plus 0.2°F per degree below 32°F | < 0.25 seconds | Adjustable (range not published) | 12:1 | Digital backlit LCD | Surface temperature; dual laser targeting; auto-scan; max, min, average and differential; high and low alarm | None | 1 x 9V, about 10 hours continuous with laser and backlight on | 281 g (9.9 oz) | 173 x 47 x 115 mm (6.82 x 1.84 x 4.53 in, L x W x H) |
An infrared thermometer reads temperature without contact. A lens collects the infrared energy a surface emits, a detector converts it to a voltage, and firmware applies emissivity to return a number in under a second. The same trick serves two markets: clinical thermometers for foreheads and ears, and industrial tools for motors, ducts, pans and panels.
The two are not interchangeable, and most bad buys come from mixing them up. A $25 hardware-store gun cannot screen a child for fever, and a $36 forehead thermometer cannot find a failing breaker. This guide separates the categories, explains what changes accuracy, and names the models worth the money. Nothing here is medical advice.
What to Know When Buying an Infrared Thermometer
Start with the surface you intend to measure. Body units are built around 32°C to 43°C, a fixed distance, and firmware that compensates for room conditions. Industrial units span -50°C to 650°C and let you set emissivity and aim at range. The hardware overlaps; the calibration and the target do not.
Emissivity
Every material radiates infrared differently, on a scale from 0 to 1. Skin, water, food, wood, plastic and paint sit around 0.90 to 0.98. Bare metal is low, often 0.05 to 0.20, so a gun pointed at polished aluminum reads colder than the metal is. Emissivity is adjustable on the Etekcity Lasergrip 1080 at 0.1 to 1.0, the Fluke 62 MAX+ at 0.10 to 1.00, and the FLIR TG165-X at 0.1 to 0.99. Without that control, cover the metal with matte tape and measure that.
Distance to spot ratio
The optics average everything in a cone that widens with distance. A 12:1 ratio gives a 1 inch spot at 12 inches, and a 2 inch spot at 24 inches. At three feet, a 1 inch connector covers a fraction of the spot, so the wall behind it dominates. The Fluke, Klein and Etekcity units are 12:1; the FLIR is 24:1.
Accuracy and response time
Industrial accuracy is a fixed error plus a percentage: plus or minus 1.0°C or 1.0 percent on the Fluke, and 2°C or 2 percent on the Klein and Etekcity. Body units quote tighter figures over a narrow band, with the iHealth PT3 at 0.2°C from 35°C to 42°C. Response runs from 0.25 seconds on the Klein IR5 to 500 ms on the Etekcity and Fluke, and about a second on the PT3. Ambient compensation matters: a unit carried in from a cold car needs 20 to 30 minutes to settle, and the PT3 adds separate ambient and distance sensors.
Key Technical Specifications
| Specification | What It Means | Recommendation |
|---|---|---|
| Range | Lowest and highest reading | 32 to 43°C body, -30 to 400°C shop |
| Accuracy | Fixed error plus a percentage | 1°C diagnostics, 0.2°C fever screening |
| Emissivity | Surface output, set from 0 to 1 | Adjustable for metal, fixed for skin |
| Distance to spot | Target size at distance | 12:1 general, 24:1 for small targets |
| Response time | Time to a stable reading | Under 500 ms for scanning |
| Ambient compensation | Correction for room temperature and drift | Essential on body units |
| Targeting | Single laser, dual laser, or image | Dual laser for panels, camera for hotspots |
| Display and modes | Backlight, min, max, average, hold, alarms | Backlight and min/max are worth having |
| Power and rating | Battery, runtime, drop rating | AA or AAA, IP54 on site |
Types of Infrared Thermometers
No-touch forehead thermometers
These hold at a fixed distance, usually 3 cm to 5 cm, and read skin over the temporal artery. The iHealth PT3 is the reference example: three sensors, about one second per reading, a silent vibration instead of a beep, and a 32°C to 42.9°C range. They are fast and non-invasive, but skin temperature shifts with sweat, drafts and direct sun.
Ear and contact body thermometers
Tympanic thermometers sit closer to core temperature and are less disturbed by room air, but they need a clean probe cover, a straight ear canal, and consistent placement. Whatever you choose, look for a stated FDA clearance and a matching 510(k) record.
Industrial handheld thermometers
These are pistol-shaped tools. The Etekcity Lasergrip 1080 covers -50°C to 610°C for $24.99 and suits grills, vents, radiators and outlets. The Klein Tools IR5 adds dual framing lasers, emissivity control, min, max, average and differential modes, and a 2 m drop rating for $64.97. The Fluke 62 MAX+ is the professional pick at $229.99, with 1.0°C accuracy, IP54 sealing, and a 3 m drop rating. All three measure surfaces only, never people.
Thermal cameras
A thermal camera replaces the spot with an image. The FLIR TG165-X pairs an 80 x 60 infrared sensor with a 2 MP visual camera and MSX edge overlay, a 24:1 ratio, 4 GB of storage for 50,000 JPEGs, and about five hours per charge at $399. It costs eight times a handheld gun but shows where the heat is.
Price Ranges
| Segment | Price | What You Get | Examples |
|---|---|---|---|
| Budget industrial | Under $35 | Single laser, 12:1 optics, wide range | Etekcity Lasergrip 1080 at $24.99 |
| Body and mid-range | $35 to $80 | Body sensing, or dual laser and emissivity | iHealth PT3 at $35.99, Klein IR5 at $64.97 |
| Professional handheld | $180 to $300 | Tighter accuracy, IP54, alarms, support | Fluke 62 MAX+ at $229.99 |
| Thermal imaging | $350 and up | Radiometric image, overlay, storage | FLIR TG165-X at $399 |
The jump from $65 to $230 buys accuracy, not features: the Klein answers a warm duct or a pan at 180°C, while the Fluke's tighter tolerance pays off when documenting a motor against a baseline.
Top Brands
| Brand | Known For | Segment |
|---|---|---|
| Fluke | Industrial accuracy, rugged bodies, support | Professional |
| Teledyne FLIR | Thermal imaging sensors, MSX overlay, inspection software | Professional imaging |
| Klein Tools | Electrician tools, dual laser targeting, drop protection | Trade mid-range |
| Etekcity | Low-cost meters, wide ranges, simple controls | Budget |
| iHealth | Consumer health devices, no-touch thermometers | Consumer health |
Comparison with Other Options
Infrared versus contact probe
A thermocouple touching the surface avoids emissivity error and is more accurate on metals, but it is slow and unsafe near live parts or moving machinery. Infrared wins on speed and distance. The practical pairing is an IR gun for the scan and a probe for confirmation.
Handheld gun versus thermal camera
A gun gives one number and a laser dot; a camera gives a field of view. For a single hot bearing, the gun is enough. For tracing a circuit or documenting several spots in one image, the TG165-X saves time that repays its price.
Forehead versus ear
Forehead units are faster, need no consumables, and are easier with a sleeping child. Ear units are less sensitive to ambient air but depend on placement and clean covers. Neither replaces a clinical thermometer used correctly.
What infrared cannot do
It reads surface temperature, not air, so it will not tell you the temperature of a room or of steam. It cannot read through glass, because glass blocks the long-wave infrared band these devices use, so the reading becomes the temperature of the glass.
Common Mistakes When Buying
- Using an industrial gun on people. Wrong range, wrong calibration, no skin compensation. A 34°C forehead reading is meaningless.
- Ignoring spot size at distance. A 12:1 unit at 3 feet averages a 3 inch circle, so background dominates.
- Measuring bare metal without correcting emissivity. Shiny metal reads low. Change the setting, or tape the surface and measure the tape.
- Expecting the laser to measure. The laser only shows where you point; dual lasers bracket the spot.
- Reading through glass or plastic. Both block the infrared band, so you get the barrier, not the object behind it.
- Skipping acclimation. A unit brought in from a cold porch drifts for 20 to 30 minutes.
- Buying a body thermometer without checking clearance. Look for an FDA-cleared device and a 510(k) record. The iHealth PT3 does not state clearance, and no 510(k) record for it was found in the FDA database in November 2026.
- Treating a reading as a diagnosis. Fever and equipment faults are judged by a person, with context.
Conclusion
Buy for the surface you will actually measure. For fever screening at home, the iHealth PT3 at $35.99 is fast and easy, provided you check its clearance status. For household and workshop checks, the Etekcity Lasergrip 1080 at $24.99 covers grills, vents and outlets, while the Klein Tools IR5 at $64.97 adds dual laser framing, emissivity control and a tougher body for $40 more.
Trade and industrial users should look at the Fluke 62 MAX+ at $229.99 for its 1.0°C accuracy, IP54 sealing and 3 m drop rating. If you need to see a whole panel rather than a single dot, the FLIR TG165-X at $399 shows the picture. Whichever you pick, measure close, set emissivity for the material, let the unit settle, and never point an industrial thermometer at a person.
Further reading: Fluke IR Thermometers, FLIR TG165-X, FDA 510(k) Database