← All gadget types

Fat Freezing Device

5 products in this category · newest first. Full spec sheets, side by side.

Fat Freezing Device

5 products in this category · newest first

🔍
Model Treatment Area Temperature Cooling Power Applicators Sessions Treatment Time Certification Power Weight Dimensions
Canta Esthetic CryoSculpt Pro Canta Esthetic Double chin, arms, back, abdomen, waist, thighs, buttocks 1°C to -11°C cooling (5 levels); 37°C to 45°C preheating (4 levels) Not published (1000 W rated output power) 2 cryo handles and 2 EMS handles, 6 interchangeable cryolipolysis cartridges (probes 3 and 6 standard, probes 1, 2, 4 and 5 optional) Not published 1 to 99 minutes; default 60 minutes for cryo and 30 minutes for EMS Not published, not FDA-cleared 1000 W, AC 110/220 V, 50/60 Hz 60 kg (132 lb) net; 80 kg (176 lb) gross 50 x 45 x 107 cm (19.7 x 17.7 x 42.1 in)
Canta Esthetic Frostellis Canta Esthetic Abdomen, flanks, thighs, arms and other pinchable subcutaneous fat areas, probe dependent 0°C to -11°C cooling; 37°C to 45°C preheating Not published (1000 W rated power) 2 vacuum handpieces, 8 flat cooling plates and 6 interchangeable probes (probes 3 and 6 standard) Not published 1 to 99 minutes Not published, not FDA-cleared 1000 W, AC 110/220 V, 15 A fuse 45.5 kg (100.3 lb) gross 57 x 34.5 x 41.5 cm (22.4 x 13.6 x 16.3 in)
Lazzybeauty Cryolipolysis Machine with 5 Handles and 360° Cooling Lazzybeauty Abdomen, flanks, thighs, arms and double chin -10°C to +45°C (cooling and heating) Not published 5 handles: 2 cryo handles with 8 interchangeable cups, plus 40K cavitation, body RF and face RF handles Not published Not published Not published, not FDA-cleared AC 110-220 V; wattage not published 65 kg (143 lb) net; 74 kg (163 lb) gross 62 x 46 x 170 cm
Mico Aes Professional 360 Cryolipolysis Machine Mico Aes Flanks, abdomen, thighs and other pinchable fat areas, with small cups for double chin -10°C to 45°C Not published (under 500 W power consumption) 5 cryo handles, 4 able to work at the same time, with 14 interchangeable silicone cups Not published 45 to 60 minutes per area Not FDA-cleared; the vendor refers to FDA-cleared cryolipolysis technology, not a clearance for this device Under 500 W, AC 110/220 V, 50/60 Hz 65 kg net, 72 kg gross 75 x 67 x 108 cm (package size)
Rejuva Fresh CoolRestore Elegance Rejuva Fresh Body and face, using the included body handle and face handle Down to -10°C Not published (85 W input power) 1 body handle and 1 face handle Not published Not published Not FDA-cleared; the vendor does not publish a clearance number for this model 85 W, 100-240 V, 50/60 Hz 7 kg (15 lb) 35 x 40 x 30 cm (14 x 16 x 12 in)

Cryolipolysis, usually called fat freezing, applies controlled cooling to a fold of subcutaneous fat. Fat cells crystallize at temperatures just below their tolerance threshold while skin and underlying tissue handle the cold better. The damaged cells break down and the body clears them over weeks and months. It is a clinic procedure, not a weight loss method and not something a strap and a gel pack can replicate.

The five machines here are professional consoles priced from $2,800 to $7,599, sold to clinics and med spas with training and warranties. Consumer cryo belts cost a few hundred dollars, publish no meaningful temperature data and hold no clearance.

What to Know When Buying a Fat Freezing Device

Start with the mechanism. A clinic applicator pulls a tissue fold into a cup under vacuum or presses a flat plate against the skin, then chills the contact surface. The Canta Esthetic CryoSculpt Pro publishes 1°C to -11°C across five levels, the Frostellis lists 0°C to -11°C, and the Mico Aes, Lazzybeauty and Rejuva Fresh quote -10°C. Those figures describe the applicator, not the fat layer.

Sessions run 35 to 60 minutes per area. The Mico Aes quotes 45 to 60 minutes, and the Canta consoles default to 60 for cryo and 30 for EMS. Four or five simultaneous handles do not deliver a stronger treatment; they shorten a multi-area session, which is an operational feature, not a clinical advantage.

Clearance is granted per device and per indication. Cryolipolysis machines are regulated as medical devices in the US. The first clearance arrived in 2010 for flank fat, and later clearances added the abdomen, submental region and thighs. A clearance held by one manufacturer says nothing about another console. None of the five models here publishes an FDA clearance, and some pages use wording such as "FDA-cleared technology" rather than a clearance for the device being sold. Treat that as marketing until you find a clearance number and its indication.

Clinics normally screen candidates: a person near a stable weight with pinchable subcutaneous fat and skin that still retracts. Cold sensitivity and circulation disorders are typically excluded, including Raynaud phenomenon and cold urticaria. Pregnancy, active infection, open skin and a hernia in the treatment area are standard exclusions, and prior surgery near the site needs a physician's review.

This article is not medical advice. It describes devices and does not recommend treatment for any person. Cryolipolysis carries real risks: frostbite and burns, prolonged numbness, bruising and swelling, and paradoxical adipose hyperplasia, a firm enlargement of the treated area documented in peer-reviewed literature that may need surgical correction. A qualified physician should assess your suitability and the alternatives. Guaranteed results and a missing risk discussion are reasons to walk away.

Key Technical Specifications

SpecificationWhat It MeansWhat to Check
Applicator temperatureLowest published cooling surface temperature-10°C is common; colder is not better
Handles and cupsApplicators that run at once, plus cup shapesSimultaneous handles help throughput
Cooling styleVacuum cup, 360 degree surround, or flat plateMatch the applicator to the fold
Vacuum rangeSuction in kPa10 to 110 kPa; adjustable levels essential
Treatment timerCountdown for one cycle1 to 99 minutes; 45 to 60 typical
Power drawRated output or input wattage85 W compact, 1000 W consoles
Console weightKilograms and footprint7 kg versus 45 to 65 kg floor
CertificationFDA clearance or equivalentNone here; verify claims
Training and warrantyWhat the vendor providesProtocols, training, 24 to 36 months

Types of Fat Freezing Devices

Floor-Standing Multi-Handle Consoles

These are what most clinics buy. The CryoSculpt Pro weighs 60 kg, stands 107 cm tall and runs two cryo handles plus two EMS handles with six cartridges. The Mico Aes Professional 360 supplies five cryo handles, four simultaneous, with 14 silicone cups. The Lazzybeauty five handle machine adds cavitation and radio frequency on a 170 cm console.

Compact Professional Consoles

The Rejuva Fresh CoolRestore Elegance is the outlier at 7 kg and 85 W, with one body and one face handle. It fits on a trolley and suits a small spa adding facial cryo, at the cost of longer sessions and less throughput.

Vacuum Cups versus Flat Plates

Most consoles use vacuum cups that pull tissue into a shaped applicator. The Frostellis offers both: two vacuum handpieces and eight flat cooling plates, plus six probes from 110 x 50.5 mm to 330 x 180 mm. Flat plates suit areas where a fold is hard to draw into a cup, but depend more on operator technique.

Consumer Belts and Hand-Held Devices

These are sold directly to the public as cryo slimming belts or hand-held coolers. They have no vacuum, tissue feedback, calibrated applicator or, in the US, clearance for fat reduction. Surface cooling that feels cold is not controlled cooling at depth, and the frostbite risk is real. They belong in a different category, whatever the marketing says.

Price Ranges

SegmentPriceWhat You GetExamples
ConsumerUnder $1,000Belts, no vacuum, no clearanceUnbranded marketplace belts
Entry professional$2,500 to $3,500One to five handles, body and face, trainingRejuva Fresh CoolRestore Elegance $2,800, Mico Aes Professional 360 $3,299
Mid professional$4,500 to $5,500360 degree cooling, cavitation and RFLazzybeauty five handle $4,798
High professional$7,000 to $7,700Dual modality, large cartridge setsCanta CryoSculpt Pro $7,299, Frostellis $7,599

The Canta models list at $9,500 and $9,999 but were quoted at $7,299 and $7,599. A clearance-holding clinical system is a separate market, sold or leased to providers, not at retail checkout.

Top Brands

BrandKnown ForSegment
Canta EstheticCryoSculpt Pro and Frostellis, dual modality, 36 month warrantyHigh professional
Mico AesFive handles, four simultaneous, 14 cups, under 500 WEntry to mid
Lazzybeauty360 degree cooling with cavitation and RF, 3 year warrantyMid professional
Rejuva FreshCompact 7 kg body and face console, 85 WEntry professional
Zeltiq and Allergan AestheticsCleared clinical brand, provider networkClinical, not retail

Comparison with Other Options

Buying a Console versus Paying per Session

In the US, clinic cryolipolysis is commonly quoted at $200 to $1,500 per cycle, and a multi-area plan often lands between $2,000 and $4,000. Against a $2,800 to $7,600 console that looks like quick payback, but the machine is the smallest cost. You need a room, trained staff, consumables, insurance, service and patient flow. For one person, paying per session is cheaper and safer.

Cryolipolysis versus Liposuction

Liposuction is surgery. It removes fat immediately under anesthesia, with surgical risks, downtime and a different cost structure. Cryolipolysis is non-invasive, gradual and limited to what can be pinched into an applicator. It does not tighten loose skin or replace substantial weight loss. Either option deserves a clinical opinion, not a product comparison.

Cryolipolysis versus EMS, RF and Cavitation

Consoles here increasingly bundle other modalities. The CryoSculpt Pro pairs cryo with HIEMT muscle stimulation, and the Lazzybeauty adds 40K cavitation plus body and face radio frequency. EMS contracts muscle, RF heats tissue and cavitation uses ultrasound. None is interchangeable with cryolipolysis, and a bundle inherits neither the clearance nor the evidence of any single modality.

Common Mistakes When Buying

  • Expecting clinic results from a consumer belt. No vacuum, no calibrated applicator, no clearance. A cold pack with marketing.
  • Reading "FDA-cleared technology" as a cleared device. The Mico Aes listing says the wording refers to the technology, not a clearance for that machine. Ask for a clearance number and its indication.
  • Buying without training or written protocols. Temperature, cup size, vacuum and dwell time are operator decisions, and a console without hands-on training shifts that risk to whoever runs it.
  • Ignoring the room and the power. A 60 to 65 kg console needs door clearance, floor loading, a suitable circuit and a service plan, and the 1000 W Canta units and 85 W Rejuva Fresh install differently.
  • Treating it as weight loss. It targets a local fat bulge, not overall weight, and outcomes vary from person to person.
  • Skipping the risk conversation. Frostbite, altered sensation and paradoxical adipose hyperplasia belong in consent. A seller who omits them is not a reliable partner.

Conclusion

For a clinic, the shortlist runs from the Rejuva Fresh CoolRestore Elegance at $2,800 for compact body and face work, through the Mico Aes Professional 360 at $3,299 for four simultaneous handles, to the Canta CryoSculpt Pro at $7,299 and the Frostellis at $7,599. None publishes an FDA clearance, so weigh training, service, warranty and applicator fit.

For an individual, buying a machine is the wrong first step. Get a consultation with a licensed physician, ask about clearance for the specific device and indication, and ask what happens if you develop a complication. A clinic with a documented protocol beats any specification here.

Further reading: FDA Medical Devices, Canta Esthetic, Mico Aes