← Back to Blind Spot Sensor
Rydeen
Rydeen BSS3 Microwave Radar Blind Spot Detection System
Blind Spot Warning, Lane Change Assistance, Rear Cross Traffic Alert, Retrofit Driver Assistance
Overview
The Rydeen BSS3 is the hidden install version of Rydeen's microwave radar blind spot kit, with two 24 GHz sensor pucks that clamp behind the rear bumper on metal brackets instead of sitting on the license plate. Rydeen rates the sensors at IP67, 15 dBm transmit power and a 0.5 to 137 mph detection speed range, with five targets tracked at once. GPS speed sensing keeps the alerts quiet below a selectable 5, 10, 15 or 20 mph threshold, and the cabin side uses two A pillar LED indicators plus an adjustable buzzer. The kit works on plastic and fiberglass bumpers only, and Rydeen points metal bumper owners to the BSS2LPB plate bar system.
Key Highlights
- Two 24 GHz radar pucks sit behind the bumper on supplied metal brackets, so the install needs no drilling into the bumper itself
- GPS arms the system above a selectable 5, 10, 15 or 20 mph threshold, with 20 mph as the default setting
- Two LED indicators are supplied in black and grey housings for the A pillars, backed by an adjustable buzzer
- Tracks up to five targets at once across a 0.5 to 137 mph detection speed range with under 0.5 mph speed error
- Adds reverse cross traffic alerts and runs on 9 to 18 V at under 200 mA
Technical Specifications
| Brand | Rydeen |
|---|---|
| Model | Rydeen BSS3 Microwave Radar Blind Spot Detection System |
| Detection Technology | 24 GHz microwave radar, two radar pucks behind the bumper (15 dBm transmit power) |
| Detection Range | Not published (Rydeen quotes a 0.5 to 137 mph detection speed range and up to five simultaneous targets) |
| Warning Type | Visual and audible: two LED indicators in black or grey housings plus an adjustable buzzer |
| Install Type | Radar pucks fixed behind the bumper with supplied metal brackets and no drilling into the bumper; LED indicators on the A pillars and a hideaway speaker in the cabin |
| Power | 9 to 18 V DC, under 200 mA working current |
| Speed Threshold | GPS activated, selectable 5, 10, 15 or 20 mph, default 20 mph; active at any speed when no GPS signal is available |
| Weather Rating | Radar sensors IP67; sensor cables are not waterproof; working temperature -20 C to 70 C |
| Compatibility | Universal fit for cars, trucks and vans with plastic or fiberglass bumpers; not for metal bumpers, where Rydeen recommends the BSS2LPB |
| App Control | No app control; alerts and settings run through the wired kit |
| Dimensions | Not published |
| Weight | Not published |
| Warranty | 1 year limited (Rydeen Mobile) |
