Causes
- Windows is still driving the panel at 60Hz A newly detected display is set to a safe mode and Windows keeps it there until the refresh rate is chosen by hand. The VX2758-2KP-MHD will happily sit at 60Hz for months on a 144Hz-capable card, and this is by far the most common reason a buyer thinks the monitor is not reaching its rated rate.
- HDMI cable rated for 1.4 instead of 2.0 This monitor's two HDMI inputs are HDMI 2.0, and 2560x1440 at 144Hz needs roughly 14Gbps of the 18Gbps available. A "High Speed" HDMI cable, an old console cable, or a long thin cable cannot carry that, so the link negotiates 1440p at 60Hz. A Premium High Speed (18Gbps) cable is required for 144Hz over HDMI.
- The graphics card's HDMI output is only HDMI 1.4 Older cards, many laptop HDMI ports, and most integrated outputs top out at HDMI 1.4, which is 1440p at 60Hz. On this monitor the DisplayPort 1.2 input is the reliable path to 144Hz, so a PC that offers 144Hz on DP but 60Hz on HDMI is behaving normally, not failing.
- 10-bit colour selected on the DisplayPort 1.2 link DisplayPort 1.2 (HBR2) carries 1440p at 144Hz in 8-bit comfortably but is at its limit at 10-bit. When Windows or the GPU panel is set to 10 bpc, the driver silently drops to 120Hz or 60Hz and 144Hz disappears from the list, which looks like a monitor fault but is a bandwidth setting.
- The NVIDIA resolution list is showing the wrong timing block In NVIDIA Control Panel the "Ultra HD, HD, SD" section lists 2560x1440 at 60Hz only. The 144Hz modes live under the PC section further down the same list. Picking the first 2560x1440 entry is enough to leave the monitor at 60Hz with no error shown.
- An adapter, dock, KVM, or a mirrored 60Hz display in the chain HDMI-to-DisplayPort adapters, USB-C hubs, cheap KVMs, and AV receivers commonly negotiate single-link rates and cap 1440p at 60Hz. Cloning the desktop onto a 60Hz laptop panel or TV forces both displays to the lower rate as well.
- Source device ceiling A PlayStation 5 or Xbox caps 1440p at 120Hz over HDMI 2.0, and some laptops only expose 144Hz through a specific USB-C or mini-DP port wired to the discrete GPU. No monitor setting can exceed what the source is sending.
How to Fix
- Use the DisplayPort input with a DP 1.2 certified cable Connect the included DP cable, or another certified DP 1.2 cable, from the graphics card directly to the monitor's DisplayPort input. Avoid adapters and docks for the test. If you must use HDMI, use a Premium High Speed (18Gbps) HDMI 2.0 cable and a port that is actually HDMI 2.0.
- Check what the monitor thinks it is receiving Press 1 (Shortcut) or the menu key (2/3/4) under the bottom-right bezel, open Setup Menu → Information, and read the reported resolution and refresh rate plus the active input. This tells you whether the panel is seeing 1440p144 or whether the source is still sending 60Hz before you change anything in Windows.
- Set 144Hz in Windows Open Settings → System → Display → Advanced display, select the VX2758-2KP-MHD, set the resolution to 2560 x 1440, then set Choose a refresh rate to 144Hz. If the dropdown only offers 60Hz, the cable or port step above has not taken effect yet.
- Set it again in the GPU control panel On NVIDIA open Change resolution, scroll to the PC timing section, choose 2560x1440, set Refresh rate to 144Hz, and apply. On AMD open Adrenalin → Display and set 144Hz there. On Intel use the Display → General refresh rate selector. Setting it in both Windows and the driver stops it reverting after a reboot.
- Drop the colour depth to 8 bpc In NVIDIA Control Panel choose Use NVIDIA color settings, set Output color depth to 8 bpc with RGB and Full range, apply, then reopen the refresh list. On AMD set Color Depth 8-bit. This is the step that brings 144Hz back on a DisplayPort 1.2 link.
- Stop mirroring and remove the middleman Set the monitor to Extend in Windows display settings and make it the only active display while testing. Bypass the KVM, dock, or capture card entirely: plug the cable into the GPU.
- Update the driver, then test a known-good source Install the latest GPU driver and reboot. If 144Hz still will not appear, connect a different PC or a console at 1440p120 to prove the panel accepts high refresh. A monitor that reports 1440p144 in its own Information page but never displays it needs warranty service; one that always reports 60Hz regardless of source may have a stuck scaler or old firmware.