← Samsung Odyssey G7 C27G75T 27" QHD 240Hz Curved Gaming Monitor Fix Guide

Fix Stuck at 60Hz on the Samsung Odyssey G7 C27G75T

💻 Device: Samsung Odyssey G7 C27G75T 27" QHD 240Hz Curved Gaming Monitor 🗓 Added

Causes

  • The monitor is connected over HDMI. The C27G75T has one DisplayPort 1.4 input and two HDMI 2.0 inputs. HDMI 2.0 cannot carry 2560x1440 at 240Hz, so on HDMI the monitor caps at 144Hz and Windows will usually offer only 60Hz until a custom mode is added. If the cable in use is HDMI, 240Hz is not a setting you can find.
  • The OSD Refresh Rate setting is left at 60Hz. Under Game → Refresh Rate the monitor can be locked to a fixed refresh rate. When this is set to 60Hz, the scaler advertises only 60Hz to the graphics card and the Windows dropdown shows nothing higher, which looks like the monitor cannot do 240Hz at all.
  • The NVIDIA resolution list is on Ultra HD, HD, SD instead of PC. In NVIDIA Control Panel → Change resolution, the top section lists TV-style modes that top out at 60Hz for 2560x1440. The 240Hz mode only appears under the PC section further down, which is the single most common reason people never see the option.
  • A DisplayPort 1.2 cable, a dock, or an adapter in the chain. 2560x1440 at 240Hz needs DisplayPort 1.4 bandwidth. An older HBR2 cable, a USB-C dock, a KVM, or an HDMI-to-DP adapter all negotiate a lower link rate and the display falls back to 60Hz or 120Hz with no error message.
  • Windows display settings were never switched off 60Hz. Windows installs the G7 with a 60Hz default and keeps it until you change it manually. On multi-monitor setups the change sometimes applies to the wrong display, leaving the G7 at 60Hz while the second screen runs at its maximum.
  • An outdated GPU driver or a low-spec output. A driver that does not know the panel's 240Hz timing, an integrated GPU, or a motherboard video output on a desktop all cap the signal. So does a laptop with DisplayPort 1.2 over USB-C that cannot drive 1440p at 240Hz.

How to Fix

  1. Use the DisplayPort input and the cable in the box. Connect the G7 with the supplied DisplayPort cable to the graphics card's DP output, not through a dock, adapter, or KVM. HDMI can only give 144Hz at 2560x1440 on this model, and most HDMI cables and ports will hand you 60Hz.
  2. Set Refresh Rate in the monitor OSD. Press the JOG button under the bezel, open Game → Refresh Rate and choose 240Hz. While there, confirm Adaptive-Sync is On if you want variable refresh, and check System → Information, which reports the resolution and current refresh rate the monitor is actually receiving.
  3. Pick the PC mode in NVIDIA Control Panel. Open NVIDIA Control Panel → Display → Change resolution, scroll past the Ultra HD, HD, SD list to the PC section, select 2560x1440, set Refresh rate to 240Hz, and click Apply. If 240Hz is missing there, the link or cable is the limit, not the monitor.
  4. Set it in Windows as well. Open Settings → System → Display → Advanced display, select the G7 in the display dropdown, and set Choose a refresh rate to 240Hz. On AMD, use AMD Software → Display and set the refresh rate to 240Hz from the same panel.
  5. Swap to a certified DisplayPort 1.4 cable. If 240Hz is not offered, try a VESA-certified DP 1.4 cable of 2m or less, and move it to the other DP-related output on the GPU if one is available. Cables included with older monitors are frequently DisplayPort 1.2 and will cap this panel at 1440p 144Hz.
  6. Update the GPU driver and the monitor firmware. Install the latest driver for your graphics card, then update the LC27G75T firmware from Samsung support using a FAT32 USB stick. Early firmware had handshake bugs at 240Hz that made the monitor fall back to 60Hz on cold boot until it was power-cycled.
  7. Test the second DisplayPort source. Try a different PC or laptop that is known to output 1440p at 240Hz. If that machine also gets only 60Hz, the monitor's scaler or port is faulty and it is a warranty case. If it works, the limitation is in your cable, GPU, or driver.