← Samsung Odyssey G7 C27G75T 27" QHD 240Hz Curved Gaming Monitor Fix Guide

Fix Horizontal Scanlines at 240Hz on the Samsung Odyssey G7 C27G75T

💻 Device: Samsung Odyssey G7 C27G75T 27" QHD 240Hz Curved Gaming Monitor 🗓 Added

Causes

  • Row-addressing artifact of this 240Hz VA panel. On the C27G75T, uniform mid-grey, pale blue, and sky gradients can show fine horizontal banding or interlaced-looking lines when the panel runs at 240Hz. It is a characteristic of how the panel addresses rows at its maximum refresh rate, which is why the lines vanish at 144Hz or 120Hz on the same unit. Panel-to-panel variance is normal: some samples show it clearly, others do not.
  • Response Time set to Fastest. Aggressive overdrive at 240Hz makes rows recover at slightly different rates, and on flat colour fields that reads as a striped or scanline texture. Setting overdrive to Standard or Faster usually removes the line pattern in motion and often reduces it in static content as well.
  • Sharpness raised above the neutral value. The OSD's Sharpness control adds edge enhancement that is applied per row. Pushing it up from the default to make text crisper exaggerates any row-level unevenness and turns faint banding into visible lines, particularly on white documents and grey UI panels.
  • A marginal DisplayPort link at 240Hz. 2560x1440 at 240Hz is close to the practical limit of a long or thin DisplayPort cable. When the link runs with errors, fine horizontal banding appears and may flicker with the image content. This kind of banding follows the cable, not the panel, and it also appears briefly when the monitor retrains the link.
  • Early firmware. Launch firmware on the C27G75T produced visible horizontal lines and inverse ghosting patterns at 240Hz. Later releases, including the one that added VRR Control, cleaned up the pattern on many units, so a monitor that has never been updated is more likely to show it.

How to Fix

  1. Check whether the lines survive a lower refresh rate. Press the JOG button under the bezel, open Game → Refresh Rate and set 144Hz. If the lines disappear and come back at 240Hz, this is the panel's row-addressing behaviour at maximum refresh. Running 144Hz or 165Hz is a legitimate workaround for desktop and single-player use.
  2. Drop Response Time to Standard. In the OSD open Game → Response Time and select Standard, then compare the same grey or sky area. Standard is the cleanest level on this panel; Fastest adds the overshoot and row striping that looks like scanlines on flat colour.
  3. Restore neutral picture settings. Open Picture and set Picture Mode to Custom, return Sharpness to its default value, and turn Eye Saver Mode and any dynamic contrast option off. Then set Brightness around 30 to 45 rather than maximum, because the artifact is much easier to see on a full-brightness white field.
  4. Test the same image at a different refresh rate, then at a different input. Display a flat 50% grey image, photograph the screen, and repeat at 144Hz and at 120Hz. If the line spacing scales with the refresh rate, the panel is being driven differently and the pattern is a timing artifact rather than a defect in the source or the cable.
  5. Update the monitor firmware. Download the current firmware for the LC27G75T from Samsung support, copy it to a FAT32 USB stick, and update through the service USB port using System → Software Update. After the update, recheck the pattern at 240Hz before changing any other setting.
  6. Replace the DisplayPort cable. Use a certified DisplayPort 1.4 cable of 2m or less directly into the GPU, with no adapter, dock, or KVM in the path. Banding that changes when you swap cables, or that appears only after the monitor has been running for a while, is a link problem rather than the panel.
  7. Enable VRR Control if the lines flicker in games. In System → VRR Control, set it to On on firmware that has the option. This stabilises the backlight and reduces the shimmer that makes the pattern obvious during motion, at the cost of slightly softer frame pacing.
  8. Use the warranty if the lines are visible at 144Hz too. Scanlines that persist at 120Hz and 144Hz, on both DisplayPort and HDMI, with neutral picture settings, are a panel fault. Record a photo of a flat grey screen and open a service request with Samsung, since this is not something the OSD can fix.