← 70mai A810 4K Dash Cam Fix Guide

Fix the 70mai App Not Connecting on the A810

💻 Device: 70mai A810 4K Dash Cam 🗓 Added

Causes

  • The phone switches back to mobile data the camera network has no internet by design, so iOS and Android both flag it as dead. Wi-Fi Assist on iPhone and adaptive or smart network switching on Android quietly drop the link and the app cannot find the camera again until you rejoin.
  • The app was denied local network or Wi-Fi permission on iOS the 70mai app must be allowed Local Network access, and on Android 13 and later a denied Nearby devices or Location permission blocks the SSID scan. The app then reports a connection failure while the phone shows it is connected in system settings.
  • A VPN, private DNS, or ad blocker is intercepting the traffic anything that routes or filters DNS sends the app's request for the camera away from the local subnet. Private Wi-Fi address rotation on iPhone can also break a network that the camera authenticates by MAC.
  • The camera's Wi-Fi is off or stuck after a hard power cut or a hot shutdown the wireless module can fail to come up even though the camera records normally. Wi-Fi off in the settings menu, or an SSID that never appears in the phone's list, is the usual sign.
  • The saved network has the wrong password the camera access point uses the default password 12345678 until it is changed in the app. A phone holding an old password, or a changed password that was never reapplied, fails to associate and the app times out.
  • Something else is already attached the A810 serves one phone connection at a time, and a tablet or a second phone left joined keeps the access point busy. The 4G hardwire kit also holds a link, and the camera drops the app rather than share it.

How to Fix

  1. Lock the phone to the camera network. Join the camera's SSID, then on iPhone turn off Wi-Fi Assist and on Android turn off auto-switch to mobile data and adaptive Wi-Fi. Accept the stay connected prompt when the phone warns there is no internet.
  2. Grant the permissions the app needs. In the phone settings allow the 70mai app Local Network on iOS, and Nearby devices plus Location on Android. Reopen the app after changing them, because the permission is read at launch.
  3. Switch off VPN and private DNS. Disable any VPN profile, private DNS hostname, or content blocker, and on iPhone set Private Wi-Fi Address to Off for the camera network. Rejoin the network from scratch rather than relying on the saved entry.
  4. Forget the network and rejoin with the default password. Remove the saved 70mai network, then join it again and enter 12345678. If you changed the password in the app and cannot recall it, reset the camera's Wi-Fi settings from the on screen menu.
  5. Confirm Wi-Fi is on at the camera. Look at the Wi-Fi indicator on the 3 inch screen and toggle the setting off and on. If no SSID appears at all, unplug the camera for 30 seconds and let it boot fully before scanning again.
  6. Disconnect everything else. Close the app on any other phone or tablet, switch off the second device's Wi-Fi, and unplug the 4G kit while you test. One client at a time is the A810's limit, and it will not tell you who is holding the link.
  7. Reinstall the app cleanly. Update to the latest 70mai app, clear its cache on Android, or delete and reinstall it on iOS, then pair again. Old app versions have failed against A810 firmware more than once, so check the camera firmware is current too.
  8. Test with a second phone. If another phone connects and streams live view, the fault is in the first phone's permissions or network settings. If neither phone can see the SSID, the Wi-Fi module is faulty and the camera needs warranty service.